A range of products that tackle the toughest jobs in and around the home

Cleaning up a Concrete Spill

blog

How to Clean up after a Concrete Spill

When you are working on a concrete project such as pouring a foundation, laying a patio or building a planter, there will be instances when you accidentally spill concrete in unwanted places. Depending on the condition of the concrete, clean up differs slightly. Wet concrete is more easily cleaned up than set concrete.
Things you will need 

 Wet Concrete
  1. If the concrete is still damp, douse it with water liberally to dilute it. Fill a bucket full of water and pour it directly onto the spill.
  2. Scrape up the concrete with a plastic putty knife whilst continuing to dilute it with water. Scrape vigorously to remove the moistened cement, throwing the spilled pieces into another bucket.
  3. Using a stiff-bristled brush, remove any remaining wet concrete. Cover with water if necessary to lift all the wet concrete.Continue to brush, adding water until the spill is gone.
  Dried Concrete
  1. Pour Fuze Products Concrete Remover onto the dried concrete and allow it to soak in for 5 to 10 minutes. This product will react with the dried concrete  and turn it into a gel.
  2. Break up any remaining residue with a stiff bristled brush or chisel. Start from the top of the spill and work toward the bottom. Do not start at the bottom or you may chip or scratch the floor underneath.
  3. If necessary add more Concrete Cleaner and repeat the process, then clean down the area with fresh water using a hosepipe or bucket

     Purchase Concrete Remover HERE
    Contact us at Fuze Products by telephone: 01543 226449
Leave a Reply

Sorry, you must be logged in to post a comment.